BME Safety Innovations for USFS Water Tenders
Safety is a critical aspect when designing any apparatus that will be operating in the urban wildland interface. Although some rigs have seating in the rear, the cab of the truck is where firefighters will spend most of their time when responding to incidents. It’s natural that many of the safety features added to protect them will be on the chassis. The initial structural change was made on the USFS Water Tenders to increase safety and durability.
Rollovers, collapsing tree branches, and rough terrain are just a few of the scenarios Boise Mobile Equipment (BME) takes into consideration when innovating the design of our fire apparatus. There are a myriad of safety elements incorporated into today’s apparatus to protect firefighters on the line; the most recent innovation was our 4”x4” steel tubing cab protectors and tubular body construction.
Protective Shell for Safety
These fire bodies are MIG and TIG Welded Aluminum, Galveneal, or Stainless Steel. We start the process with 2”x3” tubing to form the body skeleton and wrap it with 12 gauge Stainless, Galveneal, or 3/16th inch Aluminum. The bodies are built with this type of construction to add safety for firefighting personnel, as well as durability. On our existing Type 3 Engines and our new Type 4 and Tactical Tenders, we have elevated the tube behind the cab to add a layer of rollover protection to our vehicles.
BME added the very first set of 4”x4” steel tubing cab protectors to the USFS Water Tenders. The water tenders have low bodies and were unprotected during rollovers prior to adding the rack. Each piece was manufactured, welded, and assembled at our West Morris Hill location in Boise, ID. The new USFS trucks (Type 3, Type 3 Heavy and Type 4) will have BME’s signature Type 3 tubular construction. These bodies will protect from both steep grade rolling and high speed freeway crashes.
Triangulated points (gussets) are added both to the cab protectors and steel frame for increased strength and to reduce crushing points. We put emphasis on strength with triple passed welds, beveled joints and grade 8 hardware used to secure the rack to the chassis. Lastly, rubber body mounts are used to eliminate vibration when on rough terrain or traveling at high speeds.
A Safe Build Cannot Outperform Training
We are proud to serve the fire industry with our wildland apparatus; ultimately, our goal is to design an engine that will get firefighters home safely every time. There is no quick-fix or cure all for roll-over accidents, but with adequate training the likelihood of an accident is reduced. Extensive training for both station and volunteer firefighters is critical in avoiding these tragic incidents in the future.
Firefighters have enough to focus on while they are doing their job and they don’t have time to question if their truck will work. We build our fire trucks “the BME way” which means tubular bodies, stainless steel plumbing, and heavy duty doors. Our clients know they are getting the best wildland trucks on the market and a great team behind them. We have built thousands of wildland trucks and collaborated with some of the best wildland firefighters, municipalities, and government agencies to build the best apparatus in the industry. We know what works and what it takes to get the job done.
BME builds custom fire apparatus to meet your departments needs and constantly innovating to fulfil obligations. We don’t just offer option A or B, but work with each customer to understand their specific needs. Through a collaborative effort, we recommend or create a design that will exceed your expectations. Whether you are a small department, large municipality, or a federal contract, you are important to BME and will never be a just a number.