Month: October 2018

Sedona Fire District Purchases a Model 34 BME Fire Apparatus

cal fire wildland trucks

Sedona Fire District recently purchased a Model 34 (Cal Fire Spec) from BME through HGAC. At this time we are offering our Cal Fire Spec at an affordable price with Tag-On Opportunities for California Departments and through HGAC for any out-of-California departments wanting this truck. Below is an article published by the Sedona Red Rock News about the acquisition of this BME Fire Apparatus.

“It’s like getting a really great Christmas gift — but one that you have to wait until the following Christmas to open.

By a unanimous vote, the Sedona Fire District Governing Board on Aug. 14 approved the purchase of a new Type 3 fire engine in the amount of $313,405.57. However, delivery of the new truck would be 10 to 12 months from the signing of the contract.

“It’s an apparatus that will carry us for a long, long time,” Chairman Dave Soto said. “It’s definitely a work horse.”

According to a staff report, the district plans for timely replacement of fire apparatus and sets aside funding for the ordering and purchasing of vehicles. The current Type 3, which is assigned to Station 4 in Uptown, has been taken out of service and is due for replacement. The engine being replaced is a 1999 E-One Type 3 four-wheel-drive with 78,100 miles and more than 3,700 engine hours.

The truck was originally purchased in February 1999 for $188,525 with a planned service life of 15 years and was the Oak Creek Canyon fire engine staffed by the canyon volunteers. Fire Chief Kris Kazian said this vehicle has been bumped down in the priority replacement list for several years in the capital replacement plan. Due to the continued and increasing costs of maintenance for this vehicle, it has been taken out of service and is recommended for removal from the SFD fleet, he said.

“We’re replacing a 1999 unit, so it’s run its course,” Kazian said. “It’s see a lot of miles and been a lot of places.”

The report states that failure to buy this replacement vehicle leaves the district without a four-wheel drive Type 3 engine used for both in and outside district wildland fires and may see on average a decrease in the range of $50,000 to $60,000 per year paid to SFD when its assistance is requested. As an off-district Type 3 engine, it has generated in excess of $273,000 of revenue over the the past three years combined.

The manufacturer, Boise Mobile Equipment, has a joint purchasing agreement with California Department of Forestry and Fire Protection. This allows other jurisdictions to purchase from the CAL FIRE purchase order contract through the Houston-Galveston Area Council. The HGAC is a nationwide, government procurement service awarded through public competitive procurement process compliant with state statues.

Sedona Fire Battalion Chief Dave Cochrane said he’s not sure how must SFD will save by going this route but that the pricing for the new fire engine being requested is at a significant savings over trying to purchase this truck as an individual agency.

“We’ve come to the point where we can no longer kick the can down the road,” Cochrane said in terms of the engine’s need. Cochrane said the Type 3 engine holds about 500 gallons and being that it is four-wheel drive, is most often used in wildland and forest fires, especially those being battled in California.

SFD has a second Type 3 engine, but it is two-wheel drive and will stay local. A Type 6 engine, which is much smaller and pays less in terms of a daily rental by other agencies, is out of state with a Sedona crew.”

Santa Fe Springs Custom Dual Function Light Rescue

paramedic response unit

Santa Fe Springs came to us with a unique request for a dual function squad unit; this concept is different than most of our trucks but we were able to completely customize this vehicle to meet the customers needs. This rescue unit was designed to be used for environmental incidents and medical rescues. Built on a Dodge 3500 with a Cummins 350 HP Diesel engine, this unit is functional and efficient.

This unit will be used for hazardous situations a few times a month. It will also be called out to investigations, inspections and follow-ups. Santa Fe Spring’s previous environmental response unit lacked protection of hazardous waste materials during transport, installing a ROM Roll-Up Door was a the solution. The bullet lined bed of the truck is designed to safely carry 55 gallon drums. The back of this unit also features a swing-out sampling system with test tubes, clean-up kits, spill kits, and an in-cab refrigerator to keep samples cool on the way to the lab.

Although this truck is primarily used for environmental response, it was important for Santa Fe Springs to have the dual functionality of a rescue as well. This rig is equipped with Code 3 running equipment, ability to transmit out, and a hearing system outfitted for paramedic use. This vehicle has 6 compartments in the body with roll up doors, LED strip lighting, adjustable shelves, and dual slide outs for easy access to equipment.

ENGINE SPECIFICATIONS & FEATURES

2017 Dodge Ram® 3500, SLT, 4x2, Single Rear Wheel

52 Gallon Fuel Tank

ROM Roll-Up Door

Dual Slides

6.7L Cummins Turbo Diesel

Whelen Light Package

Code-3 Running Equipment

Adjustable Shelves

Air Compressor

Swing Out Sampling System w/Test Tubes

Monitor Equipment Station

Refrigerator for Sample Transport

Technical Reference Station

Bullet Lined Platform

Chassis – 2017 Dodge Ram 3500, SLT, 4×2, single rear wheel.

While this may not work for your department, it might be worth it for you to consider building a smaller vehicle for your department. In any case, when designing your new vehicle, take into consideration what the vehicle will be used for and plan for the future. Boise Mobile Equipment will work with your department to design an apparatus to meet your communities needs. For inquiries on this unit or another feel free to contact us at sales@bmefire.com or (208) 338-1444.

BME Receives 3 Separate Awards from USFS

USFS fire trucks

In the month of September, Boise Mobile Equipment (BME) has received three separate awards totaling over $15 million for production of firefighting apparatuses for the United States Forest Service (USFS). BME will produce 60 wildland engines for the USFS with an option for a 25% increase.

On the order? Type 3’s, Type 3 Heavy, and Type 4’s; which will be ready for delivery in 2019. These wildland fire trucks will be delivered to multiple locations across 10 western states.

Boise Mobile Equipment is a fire truck manufacturer located in Boise, Idaho who has been servicing the nation’s fire, police, and emergency response professionals since 1990. BME fire apparatuses are manufactured to perform in rough terrain and extreme firefighting conditions. BME is dedicated to providing departments with custom design options, superior craftsmanship, and rugged durability. BME offers various types of emergency vehicles including pumpers, tenders, rescues, Wildland Type 3’s, 4’s and 6’s, and a variety of command vehicles. In addition, BME provides equipment and services to law enforcement with its command vehicles, complete up-fitting, and K-9 units.

Aside from its work with US Forest Service, BME has manufactured fire apparatus for CAL FIRE, Bureau of Land Management (BLM), National Park Service (NPS) and multiple municipal and county fire departments throughout the United States.

Interested in purchasing a BME wildland apparatus? Feel free to email us at sales@bmefire.com or visit our wildland page for more information!

Scroll to top